{"id":38338,"date":"2020-04-01T06:41:24","date_gmt":"2020-03-31T20:11:24","guid":{"rendered":"https:\/\/www.solarquotes.com.au\/blog\/?p=38338"},"modified":"2024-01-02T14:21:23","modified_gmt":"2024-01-02T04:51:23","slug":"ancient-egypt-solar-power","status":"publish","type":"post","link":"https:\/\/www.solarquotes.com.au\/blog\/ancient-egypt-solar-power\/","title":{"rendered":"Archeologists Uncover Ancient Egyptian Solar Power"},"content":{"rendered":"
\"Ancient

Copper filled grooves in a piece of ancient Egyptian obsidian. (Image: The Irish Times)<\/p><\/div>\n

A set of papers published in the International Journal of Antiquity<\/a> last month has revealed ancient Egyptians may have had access to a technology that, in our modern world, has only taken off over the last few decades.\u00a0 While it has been known since the 1930s that simple chemical batteries were used for gold electroplating in Egypt thousands of years ago, until now it was thought these could only have been recharged by replacing the chemicals and copper rods inside.\u00a0 But thanks to literally groundbreaking research, it’s now known ancient Egyptians had access to a primitive form of solar power.<\/p>\n

Using only simple tools, they were able to use obsidian — a type of volcanic glass composed mostly of silicon — with high levels of naturally occurring boron to construct simple solar cells using hand drawn copper wire.\u00a0 While modern solar panels are over 100 times as efficient, power from these very basic cells would have been sufficient for electroplating and potentially other uses.<\/p>\n

A Ground Breaking Discovery<\/h2>\n

The team that made the discovery was led by Professor Anna Kumar<\/a> of Jones University<\/a>.\u00a0 They were called in to investigate after pieces of etched obsidian stone were found when ground was broken for a new shopping complex, only hundreds of metres from the great pyramids<\/a>.<\/p>\n

\"Dig<\/p>\n

The stones were dated to the Old Kingdom of Egypt<\/a>, which ruled the Nile Valley from 4,706 to 4,201 years ago.\u00a0 They were etched on both sides with shallow grooves containing traces of copper.\u00a0 Similar, smaller pieces of obsidian with intact inlaid copper had been found in the past, but were believed to be jewellery – a type of Ancient Egyptian bling.\u00a0 But these pieces were much too large for that.\u00a0 One suggestion was they were used as decoration in a temple, but one team member had a different idea that led to a shocking discovery.<\/p>\n

On this breakthrough, Professor Kumar says:<\/p>\n

“One of my students thought, if the larger obsidian shards had been inlaid with copper it would resemble the fine wiring on the solar panels his family uses to cope with Cairo’s blackouts.\u00a0 We took a piece already in our collection with the copper lines intact and discovered that, when placed in sunlight, it generated a small but measurable current.”<\/p>\n

 <\/p>\n

“This means the old Kingdom of Egypt had a basic solar cell over 4,500 years before the common age and over 600 years before their first use of the wheel.”<\/p><\/blockquote>\n

The Right Kind Of Obsidian<\/h2>\n

Obsidian<\/a> is a dark volcanic glass mostly made of silicon.\u00a0 It was\u00a0 highly valued and widely traded in the ancient world for use as jewellery and because it could be used to make flakes with sharp cutting edges.\u00a0 It was previously known that all obsidian found in Old Kingdom<\/a> sites came from one particular location near Timna<\/a> on the Sinai Peninsula, a considerable distance from the civilization of the Nile Valley; but until now it wasn’t known why.<\/p>\n

\"\"<\/p>\n

It turns out this particular obsidian is rich in naturally occurring boron<\/a>, an element used in silicon solar cell manufacture today.<\/p>\n

A Fortunate Discovery<\/h2>\n

By inlaying this boron rich obsidian stone with copper wires and exposing it to sunlight a simple solar cell could be created, but for it to work one side would first need to be infused with phosphorus.<\/p>\n

Ghyr Sahih of the La ‘Usdiquh Museum<\/a> offers an explanation of how this could have occurred:<\/p>\n

“The only metal these people had to work with was copper and they only had the simplest of tools.\u00a0 But you can still see people using the ancient methods today and, in my father’s time, it was a common job for the young apprentice — because they still had their teeth — to use them to draw a fine copper wire.\u00a0 It’s not hard to imagine, thousands of years ago, a craftsman sitting in the sun and making jewellery from a piece of obsidian and copper wire.\u00a0 Because he’s using his mouth he could have discovered, when the stone he was working on is in sunlight, an electrical tingle could be felt on his tongue.\u00a0 Worship of the sun was an integral part of Egyptian life and so this could have seemed very significant and encouraged them to investigate further.”<\/p>\n

 <\/p>\n

“While one side of the obsidian would need to have been exposed to phosphorous this could have happened if, at some point, it had lain in hot ashes or been exposed to sufficient smoke.\u00a0 As long as there was more phosphorous on one side than the other it would be possible for current to flow.”<\/p><\/blockquote>\n

Making Ancient Solar Cells<\/h2>\n

To create ancient solar cells it is thought that obsidian containing boron would first be etched with shallow grooves and then coated on one side with clay.\u00a0 After the clay dried they would be placed obsidian side down in hot ashes from burned wheat husks for 24 hours.\u00a0 This ash would be rich in phosphorous and at high temperatures enough of the element would move into the exposed obsidian for it to function as a solar cell.\u00a0 After cooling, the baked clay would be broken off and the etched grooves inlaid with fine copper wire.<\/p>\n

Ancient Solar Lighting<\/h2>\n

We’ve known of the existence of Ancient Egyptian electroplating since the 1930s when Walter Konig discovered what is now called the Baghdad Battery<\/a>.\u00a0 (Yes, there were Germans running around Egypt and digging up artifacts in the 1930s.)<\/p>\n

\"\"<\/p>\n

But it is now thought electroplating is a development that came long after the original uses of ancient solar electricity.\u00a0 It’s thought one of these was a form of primitive electric lighting.<\/p>\n

While most people are aware solar panels turn light into electricity, very few know that if the current is run the other way, a solar panel will give off light.\u00a0 This feature is used to test solar panels<\/a> to check for microcracks and other defects in what is known as electroluminescence testing:<\/p>\n

\"electroluminescence<\/p>\n

It is the defects in a solar panel that produce most of the light and, since a piece of obsidian is a very defective material for solar cells by today’s standards, it’s better at producing light in this way than modern panels.\u00a0 While the amount of light given off is very dim and almost impossible to see in the day, in a darkened room it would have been very impressive to people whose only other artificial lighting would have come from candles and oil lanterns.<\/p>\n

Building Pyramids Without The Wheel<\/h2>\n

The great pyramids of Egypt were built hundreds of years before the Egyptians had the wheel<\/a>.\u00a0 If a movie shows the pyramids under construction and the pharaoh going past on a chariot, then that is more anachronistic than showing Napoleon driving a tank at the Battle of Waterloo.<\/p>\n

\"\"

Never rode a tank in the General’s rank, while the cannons blazed and the French navy sank…<\/i><\/p><\/div>\n

So the question is, how did the Ancient Egyptians manage to build the Great Pyramids without even having the wheel?\u00a0 While most experts until now subscribed to the “very large whips” theory, Professor Kumar and her team believe they have found the solution.<\/p>\n

If obsidian solar cells were laid out in a path and a copper bottomed sled was given the same positive charge as the surface layer of obsidian, because like charges repel, the sled could hover millimeters above the path while carrying a considerable, but not extreme, load.<\/p>\n

Professor Kumar says:<\/p>\n

“Many people are under the impression the stone blocks used to build the pyramids were massive and almost impossible to move without modern machinery.\u00a0 The truth is, while they are not light, they are around the size of a household refrigerator with an average weight of 2.3 tonnes.\u00a0 To drag a stone like this using log rollers would require a team of 30 men.\u00a0 But our calculations show an Egyptian solar roadway could support a maximum weight of a little over 2.5 tonnes and that the average stone block could be moved along a gentle incline by just two men.”<\/p><\/blockquote>\n

If correct, this would reduce the amount of labour required to build the great pyramids to a reasonable level.\u00a0 It has been suggested this would also make it possible for the upper portions of the pyramids to be seasonally dismantled and rebuilt.<\/p>\n

Storing Ancient Solar Energy<\/h2>\n

Because obsidian solar cells are not sealed against the elements, they won’t work when wet and even high humidity will reduce their output.\u00a0 But when sand is wet and compressed, it will supply a small amount of current due to the Piezoelectric effect<\/a>.\u00a0 This is caused by crystals being placed under mechanical strain and sand is mostly composed of quartz crystals.\u00a0 This effect could have been used to provide power for electroluminesent light at night for the Pharaohs and temples of the Old Kingdom of Egypt.<\/p>\n

Professor Kumar believes this explains much of what we currently don’t understand about the Great Pyramids and why they are simply giant regular mounds of carefully arranged stones with steep sides and very little internal structure.\u00a0 She believes their purpose was to provide energy storage for the lights of Egyptian temples.\u00a0 Most of the stones of a pyramid were there to provide height, but the top portion would be used to power the lights of temples through the rainy season.\u00a0 Throughout the night, stones would be taken from the pyramid and allowed to slide down a series of slopes and impact with wet sand to provide power for temple lighting.\u00a0 During the dry season, when the solar panels would be most efficient, the stones would be replaced.<\/p>\n

It would work in a way similar to, although far less efficiently, than modern energy storage designs that use concrete blocks instead of stone:<\/p>\n