{"id":82229,"date":"2024-04-24T14:00:23","date_gmt":"2024-04-24T04:30:23","guid":{"rendered":"https:\/\/www.solarquotes.com.au\/blog\/?p=82229"},"modified":"2024-06-05T11:42:54","modified_gmt":"2024-06-05T02:12:54","slug":"the-essential-role-of-bypass-diodes-in-solar-panels","status":"publish","type":"post","link":"https:\/\/www.solarquotes.com.au\/blog\/the-essential-role-of-bypass-diodes-in-solar-panels\/","title":{"rendered":"Why Your Solar Panels Need Bypass Diodes"},"content":{"rendered":"

\"bypass<\/p>\n

Solar panel bypass diodes – those unassuming little electronic components quietly working in the background of your solar panels. What are they, why are they there, and do we really need them? <\/p>\n

Bypass Diodes 101<\/h2>\n

Diodes are electrical components that allow current to flow in one direction while blocking it in the opposite direction. You could think of them as one-way valves for electricity. They’re ubiquitous in the modern world, and many electrical and electronic devices wouldn’t work properly without them. This post will explain how bypass diodes in modern, split-cell, solar panels<\/a> work.<\/p>\n

If you’re familiar with electronics, you’ve probably used diodes that look like this:<\/p>\n

\"discrete<\/p>\n

But the bypass diodes in modern solar panels are more likely to use this form factor: \"surfaceBypass diodes are located on the back of your solar panels. Most modern solar panels have 3 diodes, one diode in each of three plastic junction boxes:<\/p>\n

\"rear

A modern solar panel has 3 junction boxes on the back for 3 bypass diodes.<\/p><\/div>\n

Here you can see the diodes inside the junction boxes:<\/p>\n

\"open

Bypass diodes circled.<\/p><\/div>\n

As the name suggests, bypass diodes are used to bypass shaded solar cells. They stop shaded, high-resistance cells from getting ‘hot spots’ and reduce the power loss in the partially shaded panel.<\/p>\n

How Bypass Diodes Work In Modern Solar Panels<\/h2>\n

A modern solar panel is typically 132 \u00a0half-cells connected in series. Bypass diodes are connected across the sub-strings of cells like this:<\/p>\n

\"bypass<\/p>\n

Bypass diodes and shaded solar cells<\/h3>\n

When a solar cell or cells are shaded, they can block the current flowing through the solar panel. If the current can’t go through the shaded cells, there are 2 possible diversions.<\/p>\n

Option #1:<\/strong>\u00a0Through the bypass diode, bypassing the blocked sub-string and the one opposite, and flowing through 4 sub-strings:<\/p>\n

\"bypass<\/p>\n

Option #2: <\/strong>Through the opposite sub-string, flowing through 5 sub-strings:<\/p>\n

\"\"

The current can’t get through the shaded cells or the diode, so it diverts through the opposite cell-string.<\/p><\/div>\n

So, which way does the current go? The software in your inverter decides.<\/p>\n

Your inverter decides whether to activate the bypass diode<\/strong><\/p>\n

Your inverter can choose to increase the current enough that the bypass diode is activated (option #1 above) or the inverter can reduce the current so that the diode is not activated (option #2).<\/p>\n

Counterintuitively, a good inverter (that is, an inverter with good MPPT software) would choose option #1, pushing the current through only 66% of the solar cells.<\/p>\n

But wouldn’t using 66% of the cells generate less power than option #2 which uses 83% of the cells?<\/p>\n

No, because using a current high enough to activate the bypass diode allows a combination of high current and lower voltage that, multiplied together (Power = Current x Voltage), gives more power than the lower current and higher voltage of option #2.<\/p>\n

This is cleared up by looking at the shaded panels’ Power & I-V curves:<\/p>\n

\"\"

Image Credit: GSES<\/a><\/p><\/div>\n

The red circles represent the two options #1 & #2. As you can see option #1 gives more power. The higher current more than makes up for the lower voltage. So a good inverter will take option #1.<\/p>\n

Is activating the bypass diode always the best option?<\/strong><\/p>\n

No – it depends on the shade pattern.<\/p>\n

For example, if 2 sub-strings are fully shaded, the most power will usually be had by dropping the current and not activating the bypass diodes:<\/p>\n

How does the inverter know which option is best?<\/strong><\/p>\n

The inverter regularly ‘scans’ the power curve by quickly trying lots of voltages and looking for the voltage that gives the highest power, and then going there until it re-scans.<\/p>\n

How does it work with multiple solar panels?<\/strong><\/p>\n

The example above is for one panel. The maximum power point for a whole array of solar panels will look different and depend on many variables including the shade pattern across the array. A good string inverter will scan the power curve for the whole array, and choose the voltage and current that delivers maximum power. A microinverter<\/a> or DC optimiser system will do this for each individual panel instead of the whole string.<\/p>\n

Bypass Diodes save one shaded panel bringing down the whole string.<\/strong><\/p>\n

When the whole panel is shaded, all three diodes activate, the whole solar panel is completely bypassed and that panel produces no power.<\/p>\n

If a shaded solar panel is wired in a series string with a bunch of other solar panels, it allows current to flow through those unshaded panels that would otherwise have their output severely compromised or even completely shut down. It’s a simple and clever idea to reduce the losses in a shaded string, but far from a perfect solution, as you’ll see if you read on.<\/p>\n

Bypass Diode Failure<\/h2>\n

Like all electronic components, diodes can be prone to failure if pushed too hard. When a bypass diode is activated, some of the energy passing through it is also dissipated as heat. If the same shading event happens day in and day out, there may come a point where the workload is too much to bear, and the diode breaks down.<\/p>\n

Shading isn’t always the culprit though. Failure can be caused by voltage surges from lightning or electrical faults and even moisture ingress. You could also be unlucky enough to cop a bad batch from the manufacturer.<\/p>\n

Solar installers have reported bypass diodes failing as both open and closed circuits. If closed, the cells in the affected sub-string are bypassed, permanently reducing the solar panel’s output. If failed as an open circuit, there’s limited shading protection, and the panel is vulnerable to hot spots.<\/p>\n

\"blown

Older style (not split-cell) solar panel junction box with bypass diodes. The right one has been completely blown away. Image: Winaico<\/em><\/p><\/div>\n

Determining Defective Bypass Diodes<\/h2>\n

How do you know if your bypass diodes have failed? Short of physically removing the panels from the roof, opening the junction box, and testing them, there are a few telltale signs but no definitive answer unless you do just that; test them with a multimeter.<\/p>\n