Solar Power Information - Cedar Vale, QLD, 4285
If you're considering installing solar panels for your Cedar Vale home (and/or a battery), this page offers useful related information and interesting statistics for Cedar Vale and the 4285 postcode area in Queensland.
If Cedar Vale isn't your location, you can search for installation information relevant to your town or suburb here:
Postcode 4285 Solar Power Statistics
In Cedar Vale's postcode area (4285), more than 5,711 small-scale systems have been installed with a collective capacity of 36,407 kW as at January 31, 2024.
Given a population of 20,311, this works out to 1,792 watts per person in the area, compared to a 947 watts Australian average. There are approximately 8,327 dwellings in the 4285 area, so that calculates out at 69 solar panel systems per 100 dwellings - the Australian average is 36.
Based on a conservative average of 155,064 kWh of energy production a day (enough to power the equivalent of 9,692 homes) and retail electricity costs of 30c per kilowatt-hour; Cedar Vale and 4285 postcode area residents are collectively generating $16,979,523 of energy at retail prices a year!
Cedar Vale solar power system owners are also contributing to greenhouse gas emission reduction, with the systems in 4285 region avoiding 45,279 tonnes of carbon dioxide emissions annually.
Installing Solar Panels In Cedar Vale?
The SolarQuotes free quoting service has been used by 95 households in Cedar Vale and 629 households across the 4285 postcode area in Queensland. Here's some of them:
You can join them! To get started, simply click the button below and we'll match you to up to 3 pre-vetted QLD accredited installers we trust who service the Cedar Vale and 4285 area. Or continue reading for more useful information.
Solar Energy Resources In Cedar Vale
Cedar Vale experiences solar irradiation levels reaching approximately 5.08 kilowatt-hours per square metre per day on average over a year. The following graph shows solar irradiation/output levels per kilowatt of installed solar panels in the 4285 area per month.
Daily/Monthly System Energy Output Estimates
Here's what you can expect to generate with various sized solar power systems in the Cedar Vale area, assuming good quality components, a suitable rooftop and professional, accredited solar installation.
Annual Electricity Output Estimates
Based on the above, the following is what you should be able to expect from a solar panel installation in Cedar Vale in terms of annual solar energy output for the location, on average:
- 5kW system - 7,773 kWh (equivalent to ~133% of annual electricity consumption)
- 6kW system - 9,328 kWh (~160%)
- 10kW system - 15,546 kWh (~266%)
- 13kW system - 20,210 kWh (~346%)
Optimal Panel Angle And Orientation
Rooftop solar panels installed in Cedar Vale, Queensland should generally face North for the best results. For a good panel angle, the general rule of thumb is it should be around the same as latitude. In Cedar Vale's case, that is 27 degrees - but usually whatever your rooftop angle is will be fine (unless it's under 10 degrees - then tilt frames may be needed).
Feed In Tariffs In Queensland
As well as providing your home with electricity, Cedar Vale solar system installation owners can be paid for surplus energy generated. In QLD, feed-in tariffs generally currently range from 5c to 10c per kilowatt-hour exported - so, it's important to compare energy retailers for the best electricity plan in the 4285 area.
Cedar Vale Solar Energy Savings
Based on a 6.6kW system installation, a self-consumption rate of 40% and the low end of the feed in tariff range rate of 5c, Cedar Vale solar power system owners can expect to save $1,539 per year.
Logan City Council Requirements.
At the time of publishing, there do not appear to be any special requirements involved with installing solar panels in the Logan City Council area.
It's important to check with Logan City Council regarding any potential changes before proceeding with installation. For further information, prospective solar owners in Cedar Vale should visit this page.
Network Grid Connection Requirements In Queensland
A series of steps must be completed in Queensland involving you, your network distributor and your installer - but your installer will do most of the administrative heavy lifting. Learn more about the grid connection process in Queensland.
Solar Panel Installers In Cedar Vale
In our network we have quality, thoroughly pre-vetted solar power system installers servicing Cedar Vale. If you're ready to get quotes from installation professionals we know and trust:
Installing A Solar Battery In Cedar Vale
Households across Australia are increasingly thinking of installing a home battery; either as an addition/upgrade to an existing PV system, or installed concurrently with solar panels. Whether batteries will make sense for your Cedar Vale home will depend on various factors.
We have solar battery installers within our network providing services to Cedar Vale who can advise you on home energy storage as a retrofit upgrade or part of a full solar + battery system installation - and provide a quote.
If you have any questions regarding choosing, buying and installing solar panels in Cedar Vale (or a home battery), feel free to contact us.
Cedar Vale Data Sources And Notes
Data sources used above for solar power information in Cedar Vale QLD 4285 include:
- Census 2021 - Australian Bureau of Statistics
- Bureau of Meteorology (BOM)
- Clean Energy Regulator data for postcode 4285 current as at January 31, 2024.
- Logan City Council - Queensland
Some additional notes:
- Household electricity consumption in Cedar Vale is based on the Australian average of 16kWh a day.
- Carbon intensity based on the Queensland average of 0.8kg per kilowatt-hour.
Bureau of Meteorology details are based on your nearest weather station, which is Jimboomba Millstream Road , coordinates 27°52'20" S 153°0'54" E, around 866 metres from the centre of Cedar Vale.