Powerbay Hot Water Heat Pump Reviews

0.0

Based on 0 ratings
Tim Johnston

Tim's Powerbay Hot Water Heat Pumps Review & Verdict

Tim Johnston covers hot water heat pumps and air conditioning for SolarQuotes.

PowerBay is one of the newer names in heat pump hot water, and is best known for its range at Bunnings. Its units are competitively priced and well specified, and I like that the 5-year parts and labour warranty covers the whole unit for every customer. But PowerBay’s heat pumps have only been on the market for a couple of years, there are very few independent reviews, and the maintenance recommendations are more onerous than I’d like. PowerBay may well turn out to be good value, but it’s too early to tell.

Powerbay Hot Water Heat Pumps: Pros & Cons

  • Competitively priced
  • 5-year parts and labour warranty on the whole unit, whether or not you claim rebates
  • Readily available through Bunnings
  • Short track record
  • Very few independent reviews
  • Onerous maintenance recommendations

About Powerbay

About PowerBay

PowerBay is an Australian renewable energy company selling solar panels, inverters, batteries, EV chargers and heat pumps, with offices in Brisbane and Melbourne.

PowerBay Contact Details

Address: 90 Southlink Street, Parkinson, QLD 4115 (also 5/41 Rose Street, Richmond, VIC 3121)
Phone: 1800 959 509
Email: [email protected]
Website: powerbay.com.au

Company Info

PowerBay is the trading name of Power Bay Pty Ltd, a Queensland company registered in August 2017. PowerBay sells a broad range of home energy products, and it partners with Bunnings, which stocks its Gen II heat pumps.

Heat pumps are a relatively recent addition. PowerBay’s first hot water heat pumps (the PB-200RE and PB-270RE) appeared around 2024, followed by the Gen II range and, in late 2026, the Gen III. Bunnings describes the units as “designed in Australia”, but CHOICE lists China as the country of origin.

PowerBay Heat Pump Details

PowerBay sells four all-in-one heat pumps across two generations. They all use R290 (propane) as the refrigerant, have an glass-lined steel tank and Wi-Fi app control, and are rated at 46 dB(A) at 1 metre - similar to an iStore and reasonably quiet for an all-in-one unit.

Gen III: 270L and 320L

The Gen III is PowerBay’s newest range:

  • 270L (PBG3-270RE-HYBRID) - suits about 2-4 people. It’s 1,852mm tall with a 650mm diameter, and weighs 112kg empty.
  • 320L (PBG3-320RE-HYBRID) - suits about 4-6 people. It’s 2,049mm tall with a 650mm diameter, and weighs 122kg empty.

Both have a 2.7kW heat pump and a 1kW backup element. The maximum current is 9.8A, so the Gen III plugs into a standard 10A power point. Compared with the Gen II, PowerBay has also added more refrigerant, a Turbo mode and a second magnesium anode.

Gen II: 200L and 300L

The Gen II is the range sold through Bunnings:

  • 200L (PBG2-200RE-HYBRID) - suits about 1-3 people. It has a 2.65kW heat pump and a 1.6kW backup element.
  • 300L (PBG2-300RE-HYBRID) - suits about 3-5 people. It has a 2.35kW heat pump and a 2.1kW backup element. 

The bigger backup elements mean the Gen II units draw up to 12.5A (200L) and 15A (300L) - more than a standard 10A power point is rated for, so check the electrical requirements with your installer.

Operating Modes

The Gen III has three operating modes:

  • ECO Mode - heat pump only, up to 60°C
  • Standard Mode - heat pump, with the element helping out below -7°C, up to 70°C
  • Turbo Mode - heat pump and element together for faster recovery, up to 70°C

The heat pump runs on its own in temperatures from -7°C to 45°C. The unit resets to 60°C every 24 hours and runs a regular sterilisation cycle to control legionella. The Gen II has similar Eco, Standard and Hybrid modes.

PowerBay Heat Pumps And Solar

PowerBay’s app includes a timer, so the unit can be set to run in the middle of the day when your solar output is highest. With a full reheat taking around five hours, a 10am to 4pm window suits it well. Performance will of course depend on the weather and other energy usage in the household.

Price

PowerBay’s prices (supply only, before rebates) are $2,050 for the 200L Gen II, $2,150 for the 300L Gen II and 270L Gen III, and $2,250 for the 320L Gen III. Bunnings sells the Gen II units for the same price.

PowerBay can arrange installation in its pilot service areas for $990 (a straight swap) or $1,200 (including a new base, drain line and removal of the old unit). It deducts STCs at $37 per certificate. The Gen II units earn around 17 STCs in Melbourne, so roughly $630. Victorian households may also be eligible for VEU discounts and the Solar Victoria rebate - all PowerBay models are on Solar Victoria’s product list.

On supply price, PowerBay sits at the cheaper end of the mid-market. As always, compare fully installed quotes after rebates rather than supply prices.

Reliability And Track Record

Reliability is probably the most important factor when choosing a heat pump. It’s all well and good to have an efficient unit that’s cheap to buy, but it’s a false economy if it doesn’t last. I like to look at how long the unit has been on the market, reviews, the warranty and the company behind it.

This is where PowerBay falls short - there simply isn’t enough data. Its heat pumps have only been around for about two years, and the Gen III range is brand new. We need heat pumps to last 10 years plus.

Reviews are thin on the ground. The 300L Gen II scores 4.6 from 13 reviews on Bunnings, and there are only single reviews (both 5 stars) for the PBG2-200RE and the older PB-270RE on ProductReview. Early reviews also tend to be positive - almost every heat pump works well when it’s new. Reviews from owners whose units have been running for 5 years are far more valuable.

On the positive side, PowerBay has been in business since 2017 and has a broad product range and a partnership with Bunnings, so it’s not a fly-by-night operation. But how it handles heat pump warranty claims in years 4 and 5 is still untested.

Maintenance

PowerBay’s maintenance requirements are more onerous than for similar units. The Gen III manual asks owners to operate the Pressure and Temperature Relief (PTR) valve every six months and check that the vents are clear, which is standard. But it also recommends:

  • draining and flushing the tank every six months (over the top)
  • checking the magnesium anode about once a year
  • descaling and discharging sediment as often as monthly, depending on your water quality
  • a service that replaces the PTR valve and both anodes, flushes the tank and cleans the evaporator - although the manual doesn’t say how often

Most homeowners won’t flush their tank every six months, and the warranty excludes failures caused by a lack of maintenance. I’m not against maintenance as a rule, but the more there is, the more likely it is to be forgotten. I’d like to see PowerBay publish a clear, realistic service schedule.

Warranty Information

PowerBay heat pumps come with a 5-year parts and labour warranty covering the tank, the compressor and refrigeration components, and other components such as sensors, valves and the backup element. It starts from the installation date and applies to domestic installations. Consumables such as anodes and valves are only covered for manufacturing defects, not normal wear and tear.

This is one of the better parts of the PowerBay offer. Plenty of mid-market brands only provide a 5-year whole-of-product warranty to customers who claim the Solar Victoria rebate, VEECs or NSW ESCs, with as little as 1 year of labour for everyone else. PowerBay offers the same warranty to all customers. It’s still shorter than some competitors though - Aquatech offers up to 7 years, and the Reclaim Eco R290 has 8 years on the tank and refrigeration components.

Powerbay has no hot water heat pumps in our database

Filter by:

 

Powerbay Reviews (0)

Show Most Relevant reviews from All time

  • 5 star 0
  • 4 star 0
  • 3 star 0
  • 2 star 0
  • 1 star 0

View Timeline

 To get your quotes, please enter your postcode: