Solar Power Information - Burra, NSW, 2620
If you're considering installing solar panels for your Burra home (and/or a battery), this page offers useful related information and interesting statistics for Burra and the 2620 postcode area in New South Wales.
If Burra isn't your location, you can search for installation information relevant to your town or suburb here:
Postcode 2620 Solar Power Statistics
In Burra's postcode area (2620), more than 6,462 small-scale systems have been installed with a collective capacity of 50,325 kW as at January 31, 2024.
Given a population of 42,192, this works out to 1,193 watts per person in the area, compared to a 947 watts Australian average. There are approximately 18,057 dwellings in the 2620 area, so that calculates out at 36 solar panel systems per 100 dwellings - the Australian average is 36.
Based on a conservative average of 197,891 kWh of energy production a day (enough to power the equivalent of 12,368 homes) and retail electricity costs of 34c per kilowatt-hour; Burra and 2620 postcode area residents are collectively generating $24,558,287 of energy at retail prices a year!
Burra solar power system owners are also contributing to greenhouse gas emission reduction, with the systems in 2620 region avoiding 59,229 tonnes of carbon dioxide emissions annually.
Installing Solar Panels In Burra?
The SolarQuotes free quoting service has been used by 72 households in Burra and 2073 households across the 2620 postcode area in New South Wales. Here's some of them:
You can join them! To get started, simply click the button below and we'll match you to up to 3 pre-vetted NSW accredited installers we trust who service the Burra and 2620 area. Or continue reading for more useful information.
Solar Energy Resources In Burra
Burra experiences solar irradiation levels reaching approximately 4.69 kilowatt-hours per square metre per day on average over a year. The following graph shows solar irradiation/output levels per kilowatt of installed solar panels in the 2620 area per month.
Daily/Monthly System Energy Output Estimates
Here's what you can expect to generate with various sized solar power systems in the Burra area, assuming good quality components, a suitable rooftop and professional, accredited solar installation.
Annual Electricity Output Estimates
Based on the above, the following is what you should be able to expect from a solar panel installation in Burra in terms of annual solar energy output for the location, on average:
- 5kW system - 7,176 kWh (equivalent to ~123% of annual electricity consumption)
- 6kW system - 8,612 kWh (~147%)
- 10kW system - 14,353 kWh (~246%)
- 13kW system - 18,658 kWh (~319%)
Optimal Panel Angle And Orientation
Rooftop solar panels installed in Burra, New South Wales should generally face North for the best results. For a good panel angle, the general rule of thumb is it should be around the same as latitude. In Burra's case, that is 35 degrees - but usually whatever your rooftop angle is will be fine (unless it's under 10 degrees - then tilt frames may be needed).
Feed In Tariffs In New South Wales
As well as providing your home with electricity, Burra solar system installation owners can be paid for surplus energy generated. In NSW, feed-in tariffs generally currently range from 5c to 10c per kilowatt-hour exported - so, it's important to compare energy retailers for the best electricity plan in the 2620 area.
Burra Solar Energy Savings
Based on a 6.6kW system installation, a self-consumption rate of 40% and the low end of the feed in tariff range rate of 5c, Burra solar power system owners can expect to save $1,572 per year.
Queanbeyan-Palerang Regional Council Requirements.
At the time of publishing, there do not appear to be any special requirements involved with installing solar panels in the Queanbeyan-Palerang Regional Council area.
It's important to check with Queanbeyan-Palerang Regional Council regarding any potential changes before proceeding with installation. For further information, prospective solar owners in Burra should visit this page.
Network Grid Connection Requirements In New South Wales
A series of steps must be completed in New South Wales involving you, your network distributor and your installer - but your installer will do most of the administrative heavy lifting. Learn more about the grid connection process in New South Wales.
Solar Panel Installers In Burra
In our network we have quality, thoroughly pre-vetted solar power system installers servicing Burra. If you're ready to get quotes from installation professionals we know and trust:
Installing A Solar Battery In Burra
Households across Australia are increasingly thinking of installing a home battery; either as an addition/upgrade to an existing PV system, or installed concurrently with solar panels. Whether batteries will make sense for your Burra home will depend on various factors.
We have solar battery installers within our network providing services to Burra who can advise you on home energy storage as a retrofit upgrade or part of a full solar + battery system installation - and provide a quote.
If you have any questions regarding choosing, buying and installing solar panels in Burra (or a home battery), feel free to contact us.
Burra Data Sources And Notes
Data sources used above for solar power information in Burra NSW 2620 include:
- Census 2021 - Australian Bureau of Statistics
- Bureau of Meteorology (BOM)
- Clean Energy Regulator data for postcode 2620 current as at January 31, 2024.
- Queanbeyan-Palerang Regional Council - New South Wales
Some additional notes:
- Household electricity consumption in Burra is based on the Australian average of 16kWh a day.
- Carbon intensity based on the New South Wales average of 0.82kg per kilowatt-hour.
Bureau of Meteorology details are based on your nearest weather station, which is Burra (Hutchinson Place) , coordinates 35°34'42" S 149°12'24" E, around 2.7 km from the centre of Burra.