Solar Power Information - Calcium, QLD, 4816
If you're considering installing solar panels for your Calcium home (and/or a battery), this page offers useful related information and interesting statistics for Calcium and the 4816 postcode area in Queensland.
If Calcium isn't your location, you can search for installation information relevant to your town or suburb here:
Postcode 4816 Solar Power Statistics
In Calcium's postcode area (4816), more than 2,321 small-scale systems have been installed with a collective capacity of 14,307 kW as at January 31, 2024.
Given a population of 8,153, this works out to 1,755 watts per person in the area, compared to a 947 watts Australian average. There are approximately 4,075 dwellings in the 4816 area, so that calculates out at 57 solar panel systems per 100 dwellings - the Australian average is 36.
Based on a conservative average of 68,014 kWh of energy production a day (enough to power the equivalent of 4,251 homes) and retail electricity costs of 30c per kilowatt-hour; Calcium and 4816 postcode area residents are collectively generating $7,447,524 of energy at retail prices a year!
Calcium solar power system owners are also contributing to greenhouse gas emission reduction, with the systems in 4816 region avoiding 19,860 tonnes of carbon dioxide emissions annually.
Installing Solar Panels In Calcium?
The SolarQuotes free quoting service has been used by 1 households in Calcium and 240 households across the 4816 postcode area in Queensland. Here's some of them:
You can join them! To get started, simply click the button below and we'll match you to up to 3 pre-vetted QLD accredited installers we trust who service the Calcium and 4816 area. Or continue reading for more useful information.
Solar Energy Resources In Calcium
Calcium experiences solar irradiation levels reaching approximately 5.67 kilowatt-hours per square metre per day on average over a year. The following graph shows solar irradiation/output levels per kilowatt of installed solar panels in the 4816 area per month.
Daily/Monthly System Energy Output Estimates
Here's what you can expect to generate with various sized solar power systems in the Calcium area, assuming good quality components, a suitable rooftop and professional, accredited solar installation.
Annual Electricity Output Estimates
Based on the above, the following is what you should be able to expect from a solar panel installation in Calcium in terms of annual solar energy output for the location, on average:
- 5kW system - 8,676 kWh (equivalent to ~149% of annual electricity consumption)
- 6kW system - 10,411 kWh (~178%)
- 10kW system - 17,352 kWh (~297%)
- 13kW system - 22,557 kWh (~386%)
Optimal Panel Angle And Orientation
Rooftop solar panels installed in Calcium, Queensland should generally face North for the best results. For a good panel angle, the general rule of thumb is it should be around the same as latitude. In Calcium's case, that is 19 degrees - but usually whatever your rooftop angle is will be fine (unless it's under 10 degrees - then tilt frames may be needed).
Feed In Tariffs In Queensland
As well as providing your home with electricity, Calcium solar system installation owners can be paid for surplus energy generated. In regional QLD, feed-in tariffs are currently 13.4c per kilowatt-hour exported.
Calcium Solar Energy Savings
Based on a 6.6kW system installation, a self-consumption rate of 40% and the fixed feed in tariff rate of 13.4c, Calcium solar power system owners can expect to save $2,295 per year.
Townsville City Council Requirements.
At the time of publishing, there do not appear to be any special requirements involved with installing solar panels in the Townsville City Council area.
It's important to check with Townsville City Council regarding any potential changes before proceeding with installation. For further information, prospective solar owners in Calcium should visit this page.
Network Grid Connection Requirements In Queensland
A series of steps must be completed in Queensland involving you, your network distributor and your installer - but your installer will do most of the administrative heavy lifting. Learn more about the grid connection process in Queensland.
Solar Panel Installers In Calcium
In our network we have quality, thoroughly pre-vetted solar power system installers servicing Calcium. If you're ready to get quotes from installation professionals we know and trust:
Installing A Solar Battery In Calcium
Households across Australia are increasingly thinking of installing a home battery; either as an addition/upgrade to an existing PV system, or installed concurrently with solar panels. Whether batteries will make sense for your Calcium home will depend on various factors.
We have solar battery installers within our network providing services to Calcium who can advise you on home energy storage as a retrofit upgrade or part of a full solar + battery system installation - and provide a quote.
If you have any questions regarding choosing, buying and installing solar panels in Calcium (or a home battery), feel free to contact us.
Calcium Data Sources And Notes
Data sources used above for solar power information in Calcium QLD 4816 include:
- Census 2021 - Australian Bureau of Statistics
- Bureau of Meteorology (BOM)
- Clean Energy Regulator data for postcode 4816 current as at January 31, 2024.
- Townsville City Council - Queensland
Some additional notes:
- Household electricity consumption in Calcium is based on the Australian average of 16kWh a day.
- Carbon intensity based on the Queensland average of 0.8kg per kilowatt-hour.
Bureau of Meteorology details are based on your nearest weather station, which is Lansdown Csiro , coordinates 19°39'28" S 146°50'4" E, around 4.2 km from the centre of Calcium.