Solar Power Information - Ferny Hills, QLD, 4055
If you're considering installing solar panels for your Ferny Hills home (and/or a battery), this page offers useful related information and interesting statistics for Ferny Hills and the 4055 postcode area in Queensland.
If Ferny Hills isn't your location, you can search for installation information relevant to your town or suburb here:
Postcode 4055 Solar Power Statistics
In Ferny Hills's postcode area (4055), more than 4,934 small-scale systems have been installed with a collective capacity of 27,027 kW as at April 30, 2024.
Given a population of 21,610, this works out to 1,251 watts per person in the area, compared to a 982 watts Australian average. There are approximately 7,707 dwellings in the 4055 area, so that calculates out at 64 solar panel systems per 100 dwellings - the Australian average is 37.
Based on a conservative average of 114,659 kWh of energy production a day (enough to power the equivalent of 7,166 homes) and retail electricity costs of 30c per kilowatt-hour; Ferny Hills and 4055 postcode area residents are collectively generating $12,555,160 of energy at retail prices a year!
Ferny Hills solar power system owners are also contributing to greenhouse gas emission reduction, with the systems in 4055 region avoiding 33,480 tonnes of carbon dioxide emissions annually.
Installing Solar Panels In Ferny Hills?
The SolarQuotes free quoting service has been used by 350 households in Ferny Hills and 912 households across the 4055 postcode area in Queensland. Here's some of them:
You can join them! To get started, simply click the button below and we'll match you to up to 3 pre-vetted QLD accredited installers we trust who service the Ferny Hills and 4055 area. Or continue reading for more useful information.
Solar Energy Resources In Ferny Hills
Ferny Hills experiences solar irradiation levels reaching approximately 5.06 kilowatt-hours per square metre per day on average over a year. The following graph shows solar irradiation/output levels per kilowatt of installed solar panels in the 4055 area per month.
Daily/Monthly System Energy Output Estimates
Here's what you can expect to generate with various sized solar power systems in the Ferny Hills area, assuming good quality components, a suitable rooftop and professional, accredited solar installation.
Annual Electricity Output Estimates
Based on the above, the following is what you should be able to expect from a solar panel installation in Ferny Hills in terms of annual solar energy output for the location, on average:
- 5kW system - 7,742 kWh (equivalent to ~133% of annual electricity consumption)
- 6kW system - 9,291 kWh (~159%)
- 10kW system - 15,485 kWh (~265%)
- 13kW system - 20,130 kWh (~345%)
Optimal Panel Angle And Orientation
Rooftop solar panels installed in Ferny Hills, Queensland should generally face North for the best results. For a good panel angle, the general rule of thumb is it should be around the same as latitude. In Ferny Hills's case, that is 27 degrees - but usually whatever your rooftop angle is will be fine (unless it's under 10 degrees - then tilt frames may be needed).
Feed In Tariffs In Queensland
As well as providing your home with electricity, Ferny Hills solar system installation owners can be paid for surplus energy generated. In QLD, feed-in tariffs generally currently range from 5c to 10c per kilowatt-hour exported - so, it's important to compare energy retailers for the best electricity plan in the 4055 area.
Ferny Hills Solar Energy Savings
Based on a 6.6kW system installation, a self-consumption rate of 40% and the low end of the feed in tariff range rate of 5c, Ferny Hills solar power system owners can expect to save $1,533 per year.
Moreton Bay Regional Council Requirements.
At the time of publishing, there do not appear to be any special requirements involved with installing solar panels in the Moreton Bay Regional Council area.
It's important to check with Moreton Bay Regional Council regarding any potential changes before proceeding with installation. For further information, prospective solar owners in Ferny Hills should visit this page.
Network Grid Connection Requirements In Queensland
A series of steps must be completed in Queensland involving you, your network distributor and your installer - but your installer will do most of the administrative heavy lifting. Learn more about the grid connection process in Queensland.
Solar Panel Installers In Ferny Hills
In our network we have quality, thoroughly pre-vetted solar power system installers servicing Ferny Hills. If you're ready to get quotes from installation professionals we know and trust:
Installing A Solar Battery In Ferny Hills
Households across Australia are increasingly thinking of installing a home battery; either as an addition/upgrade to an existing PV system, or installed concurrently with solar panels. Whether batteries will make sense for your Ferny Hills home will depend on various factors.
We have solar battery installers within our network providing services to Ferny Hills who can advise you on home energy storage as a retrofit upgrade or part of a full solar + battery system installation - and provide a quote.
If you have any questions regarding choosing, buying and installing solar panels in Ferny Hills (or a home battery), feel free to contact us.
Ferny Hills Data Sources And Notes
Data sources used above for solar power information in Ferny Hills QLD 4055 include:
- Census 2021 - Australian Bureau of Statistics
- Bureau of Meteorology (BOM)
- Clean Energy Regulator data for postcode 4055 current as at April 30, 2024.
- Moreton Bay Regional Council - Queensland
Some additional notes:
- Household electricity consumption in Ferny Hills is based on the Australian average of 16kWh a day.
- Carbon intensity based on the Queensland average of 0.8kg per kilowatt-hour.
Bureau of Meteorology details are based on your nearest weather station, which is Ferny Hills Aust Woolshed , coordinates 27°23'41" S 152°55'51" E, around 752 metres from the centre of Ferny Hills.