Solar Power Information - Kilmorey Falls, QLD, 4465
If you're considering installing solar panels for your Kilmorey Falls home (and/or a battery), this page offers useful related information and interesting statistics for Kilmorey Falls and the 4465 postcode area in Queensland.
If Kilmorey Falls isn't your location, you can search for installation information relevant to your town or suburb here:
Postcode 4465 Solar Power Statistics
In Kilmorey Falls's postcode area (4465), more than 360 small-scale systems have been installed with a collective capacity of 2,114 kW as at January 31, 2024.
Given a population of 1,070, this works out to 1,975 watts per person in the area, compared to a 947 watts Australian average. There are approximately 591 dwellings in the 4465 area, so that calculates out at 61 solar panel systems per 100 dwellings - the Australian average is 36.
Based on a conservative average of 9,942 kWh of energy production a day (enough to power the equivalent of 621 homes) and retail electricity costs of 30c per kilowatt-hour; Kilmorey Falls and 4465 postcode area residents are collectively generating $1,088,615 of energy at retail prices a year!
Kilmorey Falls solar power system owners are also contributing to greenhouse gas emission reduction, with the systems in 4465 region avoiding 2,903 tonnes of carbon dioxide emissions annually.
Installing Solar Panels In Kilmorey Falls?
The SolarQuotes free quoting service has been used by 0 households in Kilmorey Falls and 35 households across the 4465 postcode area in Queensland. Here's some of them:
You can join them! To get started, simply click the button below and we'll match you to up to 3 pre-vetted QLD accredited installers we trust who service the Kilmorey Falls and 4465 area. Or continue reading for more useful information.
Solar Energy Resources In Kilmorey Falls
Kilmorey Falls experiences solar irradiation levels reaching approximately 5.61 kilowatt-hours per square metre per day on average over a year. The following graph shows solar irradiation/output levels per kilowatt of installed solar panels in the 4465 area per month.
Daily/Monthly System Energy Output Estimates
Here's what you can expect to generate with various sized solar power systems in the Kilmorey Falls area, assuming good quality components, a suitable rooftop and professional, accredited solar installation.
Annual Electricity Output Estimates
Based on the above, the following is what you should be able to expect from a solar panel installation in Kilmorey Falls in terms of annual solar energy output for the location, on average:
- 5kW system - 8,584 kWh (equivalent to ~147% of annual electricity consumption)
- 6kW system - 10,301 kWh (~176%)
- 10kW system - 17,168 kWh (~294%)
- 13kW system - 22,319 kWh (~382%)
Optimal Panel Angle And Orientation
Rooftop solar panels installed in Kilmorey Falls, Queensland should generally face North for the best results. For a good panel angle, the general rule of thumb is it should be around the same as latitude. In Kilmorey Falls's case, that is 26 degrees - but usually whatever your rooftop angle is will be fine (unless it's under 10 degrees - then tilt frames may be needed).
Feed In Tariffs In Queensland
As well as providing your home with electricity, Kilmorey Falls solar system installation owners can be paid for surplus energy generated. In regional QLD, feed-in tariffs are currently 13.4c per kilowatt-hour exported.
Kilmorey Falls Solar Energy Savings
Based on a 6.6kW system installation, a self-consumption rate of 40% and the fixed feed in tariff rate of 13.4c, Kilmorey Falls solar power system owners can expect to save $2,271 per year.
Maranoa Regional Council Requirements.
At the time of publishing, there do not appear to be any special requirements involved with installing solar panels in the Maranoa Regional Council area.
It's important to check with Maranoa Regional Council regarding any potential changes before proceeding with installation. For further information, prospective solar owners in Kilmorey Falls should visit this page.
Network Grid Connection Requirements In Queensland
A series of steps must be completed in Queensland involving you, your network distributor and your installer - but your installer will do most of the administrative heavy lifting. Learn more about the grid connection process in Queensland.
Solar Panel Installers In Kilmorey Falls
In our network we have quality, thoroughly pre-vetted solar power system installers servicing Kilmorey Falls. If you're ready to get quotes from installation professionals we know and trust:
Installing A Solar Battery In Kilmorey Falls
Households across Australia are increasingly thinking of installing a home battery; either as an addition/upgrade to an existing PV system, or installed concurrently with solar panels. Whether batteries will make sense for your Kilmorey Falls home will depend on various factors.
We have solar battery installers within our network providing services to Kilmorey Falls who can advise you on home energy storage as a retrofit upgrade or part of a full solar + battery system installation - and provide a quote.
If you have any questions regarding choosing, buying and installing solar panels in Kilmorey Falls (or a home battery), feel free to contact us.
Kilmorey Falls Data Sources And Notes
Data sources used above for solar power information in Kilmorey Falls QLD 4465 include:
- Census 2021 - Australian Bureau of Statistics
- Bureau of Meteorology (BOM)
- Clean Energy Regulator data for postcode 4465 current as at January 31, 2024.
- Maranoa Regional Council - Queensland
Some additional notes:
- Household electricity consumption in Kilmorey Falls is based on the Australian average of 16kWh a day.
- Carbon intensity based on the Queensland average of 0.8kg per kilowatt-hour.
Bureau of Meteorology details are based on your nearest weather station, which is Pinnacle , coordinates 26°10'26" S 148°24'22" E, around 23.4 km from the centre of Kilmorey Falls.