Tesla App’s “Charge On Solar” Hits Prime Time In Australia

Tesla Charge on Solar

After a trial run, the Tesla app’s Charge on Solar feature is now available to all Australian owners of a Powerwall and compatible Tesla electric vehicles – and it should work with any hard-wired home EV charger.

When initiated, the feature enables owners to charge only when surplus electricity is being produced by their solar power system, without dipping into mains grid supply (or the Powerwall) – but there’s flexibility also built in.

Once set up, Charge on Solar will kick in when there’s at least 1.2 kW of stable surplus solar electricity. The vehicle will adjust charge power approximately every 10 seconds; matching surplus generation and electricity consumption elsewhere in the home. This, according to Tesla, is to maximise efficiency and the service life of EV charging equipment being used.

A trial of the feature was launched early this year in Australia to randomly selected owners, but we’re informed it’s now available to all Australian Tesla owners who have the required vehicle, hardware and software, being:

  • Model S, Model 3, Model X or Model Y (but 2012-2020 Model S and 2015-2020 Model X currently don’t support it) – software: 2023.32 or higher
  • Powerwall – software: 23.12.10 or higher
  • Tesla app – software: 4.30.5 or higher

Tesla indicates Powerwall’s Storm Watch, Backup Reserve, Self-Powered and Time-Based control modes will work seamlessly with Charge on Solar.

The feature also offers a function whereby adjusting one slider in the app allows you to charge to a specified level from solar and the grid, and the other to charge only with excess solar to the limit you select. For example, you could start topping up as usual (solar + grid) for daily driving to 40%, then only with surplus power from PV to 90%.

Scheduled charging enables using excess solar until a specified time, after which the vehicle will accept supply from any source up to the lower charging limit set.

To use Charge on Solar, you’ll need to specify a location to avoid issues when at another location where surplus solar energy isn’t available.

Tesla EV Charger Not Required

Tesla’s hard-wired home EV charger is called the Wall Connector, the Gen 3 version of which costs around $800 before installation. But it seems you won’t need this bit of kit if you already have another device installed at your place. SolarQuotes founder Finn is successfully using the feature with his solar power system, a Powerwall 2, a Delta EV charger and a Tesla Model 3.

Tesla EV charging on solar power only

For further information on Tesla’s Charge on Solar and how to set it up, details are on this page. And if you’re in the market for an EV charger (Tesla owner or otherwise), compare models available in Australia including those with solar smart charging support on the SolarQuotes EV charger comparison table.

In other recent Tesla news, the company held a media and installer briefing about the new Tesla Powerwall 3 (PW3) in Sydney late last week. SQ’s Neerav Bhatt was at the event and has answers to a bunch of Powerwall 3 questions. Finn has also weighed in PW3; answering the question: “is it the right choice for every Australian household that wants a home battery?”

PW3 (and Powerwall 2) pricing and specifications can be found on SQ’s solar battery comparison table, where you can see how they stack up against other home energy storage solutions available in Australia.

About Michael Bloch

Michael caught the solar power bug after purchasing components to cobble together a small off-grid PV system in 2008. He's been reporting on Australian and international solar energy news ever since.

Comments

  1. Dominic Wild says

    My older Fronius Symo 3-phase gives me a 12V signal, which I have sent to a 40A SSR to drive the H/W system based on production and not surplus as set in the device management software, in my case when 2,400W is being produced. I know what it is being running, so I can make the decision. It would need another $500 + installation gadget from Fronius to drive it on surplus.

  2. Case Aarts says

    In the absence of bi-directional chargers in NZ, I want to create a connection from the DC charging port on my Nissan Leaf 2022 62Kwh to a solar inverter.
    This solar inverter then connects to the Powerwall 2 system, which already has 2 solar inverters from an solar array feeding into it. To power the house from the EV, use the DC connection. To charge the car on solar, disconnect the DC plug and charge via the AC socket on the car.
    This is my theory, will this work in practice or can anyone maky any suggestions?
    Case Aarts NZ

    • Anthony Bennett says

      The Chinese make CHAdeMO V2L inverters which you can find reference to via Andy’s Off Grid Garage & his adjacent PHEV channel.

      Beyond that you’re either going to need professional qualifications & an appetite for risk that I wouldn’t recommend.

Speak Your Mind

Please keep the SolarQuotes blog constructive and useful with these 5 rules:

1. Real names are preferred - you should be happy to put your name to your comments.
2. Put down your weapons.
3. Assume positive intention.
4. If you are in the solar industry - try to get to the truth, not the sale.
5. Please stay on topic.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Get the latest solar, battery and EV charger news straight to your inbox every Tuesday